The key benefits of Tumblr are that they are fairly easy to put in. These are straightforward to install on all standard joist centers, no joist cutting is needed so which makes it even simpler. The tandem whole house fan is not difficult to use, a 2 speed operation using a handheld control standard for your home. They may be good looking; also, they are virtually invisible inside the ceiling of your home in the living area space.

The tandem whole house fans feature a limited warranty against manufacturing defects having a 2 year labor plus protection also so you can be sure your tandem whole house fan remains safe and secure.

When installing a tandem whole house fan, consider if you might be capable of even deal with electric. If you are not very experienced at installing residential electrical wiring or you are not familiar with the national and local building codes you must contact a qualified electrician to complete the installation.

The fan must be attached to a circuit with the correct capacity to safely operate as well as prevent any injury to the motor using minimum 14 gauge wiring. The circuit must have at the very least 5 amperes of available capacity. If you cannot confirm there is sufficient electrical capacity with an existing circuit, an independent dedicated h0use must be attached to the house.

The tandem whole house fan needs to be placed in an attic with at least 500 square feet of area that may be empty to a make sure of enough breathing area. A working attic ventilation system with both an intake and exhaust ventilation allows the heated air to be exhausted from the tandem whole house fan and required to exit the attic. Determine the spot. The is designed to be horizontally mounted on the ground of your attic, usually above a centrally located hallway for efficient operation.

Locate the middle of the hallway ceiling and drill a hole to mark this location. Push a marker in the hole so it can be located. Check out attic for just about any obstructions. Make sure you will find no obstructions including any wires, pipes, or another utilities above your drilling area inside the attic prior to drill. Finally, check selected location from the attic. Locate the earlier hole that you simply made. Locate the joists that are nearest towards the hole and clear 18″ of insulation on all sides from the hole to supply a clear work area.